
ChemWindow 6 Installation Instructions

Please follow the sets of instructions below and remember to keep your 
serial number in a safe place; you may need to refer to it later.

To install ChemWindow 6, please follow the steps listed below:

Note 1: If you are installing the software on an NT system, you must first log on as the system 
administrator.

Note 2: If you have a virus detection program running, we recommend you turn it off during the 
installation of the software.

1. Insert the CD-ROM into the CD-ROM drive.

2. Run the Setup program from the CD-ROM. To do so:

a. Click on the Start Button. Then choose Run.
b. Click on the Browse button.
c. Select your CD-ROM drive.
d. Double-click SETUP.EXE.
e. Then click OK to start the installation program.

3. Follow the instructions in the series of dialog boxes that follow. During the installation you will 
be asked for the serial number - please keep your serial number in a safe place.

Note 3: You can not choose a networked drive on which to install the software. For security reasons, 
you are limited to installation on a local drive with this version of the software. If you are interested 
in installing the software on the network (shared drive), please inquire about the ChemWindow 6
Concurrent (Network) version.

Page 1 of 1
96072